ViTESSE VS-763 - Инструкция (Страница 4)

3.Cleaning tools use
a. Crevice tool:
For radiators, crevices, corners,
baseboards and between cushions.
b. Dusting brush (2 in 1) is used for the
furniture, venation, blinds, book, lamp
shades and shelves,etc. Separately it
can be used as a sofa nozzle.
INSTRUCTIONS FOR USE
Before using appliance, pull out a sufficient length of cable and insert the plug
into the power socket. A yellow mark on the power cable shows the ideal cable
length. Don't expend the cable beyond the red mark.
1. Switch Button
Insert the power plug into the socket.
Press the ON/OFF Switch button to
switch on the vacuum machine.
2. Auto Cord Rewind Button
To rewind the power cord, press the
rewind button with one hand and guide
the cable with the other hand to ensure
that it does not whip causing damage.
3. Power Control Button
Slide the Electronic Power Control
Button to control the suction of the
cleaner.
P/5 P/6
MAINTENANCE
1. How to drop dust and clean the dust cup Always operate the cleaner with
dust cup installed.
a. Press the dust cup release button, handing the dust cup handle, take
off the dust cup from the vacuum cleaner.
b. Press the dust cup bottom release button, then the dust will full down
automatically.
c. If find the filters too dirty, please press the dust cup cover release
button, take out the filter assembly out of the dust cup, then rotate the
nylon filter or HEPA filter from the cover, you can wash them with water.
You should dry them completely before you fix them on the cover and
use again. Please pay attention to the “A “ and “B” mark on both filters
and cover, in order to equip the filters at correct place on the cover.
2. Install dust cup on the body:
a. Pull the dust cup bottom back to the dust cup until the button be locked.
b. Put the dust cup onto the body case properly.
c. Push on the dust cup to fix with body.