Инструкция по эксплуатации ViTESSE VS-602
Страница 3
SETTING PERSONAL DATA:-
The scale can store 12 persons' data (including age, height, gender, units).
1. PRESS THE ON/OFF BUTTON
The display shows pre-program number, gender, age & height. When the
pre-program number is flashing, press the SET button to enter setting
mode
2. SET WEIGHT UNITS
Changing the Battery:-
1. Open the battery cover on the rear
of the scale.
2. Insert 4 * AAA Batteries
3. Close the cover.
Note:
1. Please take the batteries out of the scale if the scale is not used for a long
time.
2. The battery should, when it is no longer capable of functioning, be disposed
according to the local regulations in your municipality; in most cases you
can deliver the battery to your local recycling centre.
3. If the batteries are leaking, please change them immediately, otherwise it
may cause damage to the scale.
P/3
P/4
3. SET YOUR GENDER
4. SET YOUR HEIGHT
When “lb” or “st” is selected the scale displays:-
5. SET YOUR AGE
When the age is 12 or below 12, the scale is in child mode
6. After the pre-program number flashes 6 times, all the personal data are
stored then the scale is in measuring mode.
7. Set other pre-program numbers, repeat step 1-6
8. The default setting is kg, man, 170cm, 30 years old. (Default setting might
be different as a result of OQC test).
9. The scale will turn off automatically if you do not press any button in about
30 seconds while setting personal data.