Vitek VT-3589 - Инструкция (Страница 8)

SLEEP SWITCH OFF
The sleep automatic turn off function is set in the radio; it will automate to
turn off the radio when sleeping to listen to the radio, in order to avoid wast-
ing power.
In the clock state, keep the Power switch/Sleep OFF button (1) pressed to
turn on the radio, the symbol "SLEEP" and "90" will display on the LCD, the
sleep OFF function works, and it will auto turn off after 90 minutes.
In the sleep OFF state, press the power switch/sleep OFF button to adjust
the sleep OFF time.
The change law of the sleep time is as follows:
3. The sleep time is adjusted; the last band frequency before turning off is
displayed on the display screen after four seconds. You can receive your
desired station program; the radio will be turned off
automatically, when reaching the sleep time.
4. If you want to turn off the radio in advance, please press the Power
switch/Sleep OFF button (1) to turn off the radio, the time appears on the
display screen.
NOTICE TO USERS
Use Reset Button
The microcomputer chip is used to handle
radio signal in the unit, when you change bat-
tery or change-over external power, mis-oper-
ate, or the radio is jammed, the microcomputer
chip in the unit is maybe in the state of dead
cycle, the outside order is unacceptable, it is
out of order. At this time, only the night illumi-
nation lamp functions.
The main expressions:
1. There is no display on the display screen, and you can not turn on the
radio when you press the power switch;
2. There is display on the display screen, but the buttons do not function;
3. After the radio is turned on, the display is confusing on the screen and the
ENGLISH
7