Vitek VT-3512 - Инструкция (Страница 3)

CONTROL BUTTONS
1. Lighted display
2. SNOOZE button
3. SLEEP button
4. HOUR setting button
5. Power cord
6. MINUTE setting button
7. TIME setting button
8. ALARM setting button
9. Radio frequency scale
10. Function selector
11. Band selector
12. FM antenna
13. VOLUME/BUZZER knob
14. Frequency tuning knob
15. Light adjustment
16. Alarm indicator
17. Speaker
18. Battery compartment
USEFUL INFORMATION
This clock radio only oper­
ates on alternating current.
This clock radio has a builtin
antenna (12) for better recep­
tion of FM1 and FM2 frequency
signals. Connect the power
cord (5) to the outlet. Make
sure that the voltage indicated
on the device matches the
voltage in your home. Place
one 9 V battery (not included)
into the battery compartment
(18). The battery maintains the
clock in case of power failure.
In such cases, the display will
not work, but the time is being
maintained.
RADIO
1. Set the ON/AUTO/OFF
selector (10) to the ON
position.
2. Set the band selector (11)
to the desired band.
3. Tune to the desired radio
station using the tuner
knob (14).
4. Adjust the volume using the
volume knob (13).
5. To turn off the radio, set the
MODE selector (10) to the
OFF position.
6. In the upper lefthand corner
of the lighted display, the
alarm status is indicated.
SETTING THE CURRENT TIME
While holding the TIME but­
ton (7), set the hours using the
HOUR button (4) and the min­
utes using the MIN button (6).
SETTING THE ALARM TIME
While holding the ALARM but­
ton (8), set the hours using the
HOUR button (4) and the min­
utes using the MIN button (6).
SLEEP TIMER
1. This clock radio model fea­
tures a “Sleep Timer” func­
3
ENGLISH
3512IM_new.indd 3 19.11.2008 11:35:34