Hyundai H-1545 - Инструкция (Страница 4)

4
Instruction manual
button once, after approximately 9 minutes the
alarm will be on again. This operation can be
repeated several times within 59 minutes.
• If you want to stop the alarm, slide ON/
OFF/AUTO switch to OFF position.
USB operation
Playback
• Lift the plastic cover on the top panel and
insert a USB device into the USB port.
• Slide USB/FM/AM switch to USB position.
• Slide ON/OFF/AUTO switch to ON
position. Playback of the first track contained in
the USB will start automatically.
• Press button to pause playback. Press
the button again to resume playback.
• Press button or button to go to
previous or next track.
• Slide ON/OFF/AUTO switch to OFF position
to stop playback and turn off the USB mode.
General USB notes
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (compatible with USB
version 2.0 and 1.1) up to 8 Gb.
• FAT32 file system is supported by USB
system of this unit.
Always switch off the unit before
removing a USB flash drive to prevent damage
to your USB device.
Note: Although this product is fully
compatible with USB 2.0 and 1.1 standard
format, a small percentage of USB flash drives
might not be readable, due to those device
manufacturers’ non-compliance with the full
(official) USB standards.
Laser projection
• The unit is equipped with a laser projection
with individual time setting.
• Slide PROJECTION ON/OFF switch to ON
• Slide ON/OFF/AUTO switch to OFF or
AUTO position.
• Press SLEEP button once. You can have
59 minutes playing the radio to accompany you
to sleep.
• To set for a desired period of sleep
(maximum 1 hour 59 minutes), simply press
and hold SLEEP button and then press HOUR
button or MIN button to set the desired period
of the sleep function.
• USB playback or radio will stop
automatically after the preset time expires.
• To turn off the radio before sleep time
expires, press SNOOZE button or SLEEP
button once.
Alarm operation
Setting the alarm
• Press and hold ALARM button.
• Without releasing ALARM button, press
HOUR button or MIN button to set the desired
wake up time.
• Release ALARM button to show the
current time.
Alarm sound setting
• Turn on the radio, select a band a tune to
the needed frequency. Slide ON/OFF/AUTO
switch to AUTO position. Set the alarm time.
The radio will start to play when the alarm time
comes.
• Slide ON/OFF/AUTO switch to AUTO
position. Rotate VOLUME regulator towards
minimum level until a click. Set the alarm time.
The buzzer will sound when the alarm time
comes.
• Connect a USB device and set the USB/
FM/AM switch to USB position. Slide ON/OFF/
AUTO switch to AUTO position. Set the alarm
time. The USB playback will start when the
alarm time comes.
Snooze control
• When the alarm is on, press SNOOZE