Vitek VT-3534 - Инструкция (Страница 8)

WEATHER DISPLAY
Check Local Temperature
* Local temperature displays instantly after batteries
are inserted.
Local temperature and humidity readings will alternate
display on the receiver.
Check Remote Temperature
A. Press CHANNEL to toggle between Channel 1, 2, 3 and 4.
Temperature readings will alternate display on the receiver.
C or F Temperature Display
B. Toggle between °C and °F by pressing ALARM/(C/F) in clock mode.
Min and Max Temperature
C. Press MAX in Clock mode to display minimum
temperature record
D. Press MIN again in Clock mode to display maxi-
mum temperature record
TEMPERATURE ALARM
The temperature alarm function allows you to have an
alarm sound if the temperature rises above or drops
below a particular set point.
Local Temperature Alarm
1. Select local temperature alarm mode using SNOOZE/MODE
The symbol will display.
2. Press ALARM/(C/F) to set high temperature alarm ( ),
low temperature alarm ( ) or disable alarm function (blank)
3. Press +/- to set temperature value
4. Press MODE again to finish setting
Remote Temperature Alarm
1. Select local temperature alarm mode using SNOOZE/MODE
The symbol will display.
2. Select channel (1, 2, 3, 4 or local) using CHANNEL
3. Press ALARM/(C/F) to set high temperature alarm ( ), low temperature
alarm ( ) or disable alarm function (blank)
4. Press +/- to set temperature value
5. Press MODE again to finish setting
*
When alarm sounds, the sounding channel is displayed,
and or flashes to indicate whether it is the high or low temper-
ature alarm. Press any button to shut off alarm.
ENGLISH
7
3534.qxd 22.09.2004 15:22 Page 7