Binatone TP-4070 - Инструкция (Страница 8)

8 88 88
MAINTENANCE
AND CLEANING
1. Before cleaning or storing, disconnect the ap-
pliance from the power supply and wait un-
til the appliance is completely cooled.
2. Push on the lid lock valve (16) (16) (16) (16) (16) with «arrow»
indication, pull the lid (3) (3) (3) (3) (3) up, and take off
the lid (3) (3) (3) (3) (3) from the appeliance.
3. To avoid electrical injuries, do not place the
casing (1) (1) (1) (1) (1) and power cable (15) (15) (15) (15) (15) in water. The parts of the
appliance as well as the internal bulb (2) (2) (2) (2) (2) can be cleaned by
using a damp lint free cloth.
4. Store the appliance only when completely dry.
USEFUL RECOMMENDATIONS
In areas with high water hardness, scale must
be regularly removed from the appliance to keep it
in good operating condition, since an excessive scale
in the appliance could result in the appliance mal-
operation or failure. Frequency of de-scaling
de-pends on the tap water hardness in your region
and how often you use your thermopot. If water in
your house is hard, we recommend filtering it - this will decrease
the amount of deposited scale substantially.
Scale removal:
1. Cut a lemon in 4 parts, wrap in cheesecloth, and place in the
internal bulb (2). (2). (2). (2). (2).
2. Pour water in the appliance up to the maximum mark on the
indicator (13). (13). (13). (13). (13).
3. Boil the water and keep the appliance connected to the power
grid for one hour.
4. Pour out the water and remove scale with a soft cloth.
5. To neutralize lemon odor, pour clear water in the appliance
and boil it.
Anything else should be performed in authorized service cen-ters.
If you do not intend to use the appliance for some time, place the
completely cooled thermopot in a package box and store in a safe
dry place out of children’s.
AFTER-SALES SERVICE
If your appliance does not operate or does
not operate properly, contact an authorized
service center for consultancy or repair.
The warrantee does not cover:
– product packing, consumables and acces-
sories (tips, etc.);
– mechanical damages and natural wear of the product;