VARTA V-CDR101US - Инструкция (Страница 5)

5 www.varta-electronics.ru
Instruction manual
• Press BACK/NEXT buttons to select the
track number you wish to be stored in the first
memory program position, and press PROG/
REPEAT button to confirm your selection.
• When you press PROG/REPEAT button,
the display will advance to the next memory po-
sition number (eg. “P02” for 2nd position).
• Repeat the previous 2 steps, each time
selecting any track number to be stored in the
successive memory positions.
• After each track number, remember to
press PROG/REPEAT button.
• After a maximum of songs (or less) have
been selected as described above, press
PROG/REPEAT button.
• Also, the “P” symbol will remain on to
indicate that you have saved the program.
• Pressing USB/PLAY/PAUSE button will
now play back the saved sequence in the pro-
gram memory.
• Pressing NEXT or BACK button will
move to the next or previous track in the
saved sequence.
• To clear the entire program stored in the
memory, press STOP/CARD button twice (“P”
symbol will disappear) or switch off the unit.
MAIntEnAnCE AnD CARE
• Check your batteries regularly; old or
discharged batteries should be replaced. If
the unit is not going to be used for some time
or is being run exclusively on the alternative
power, remove the batteries to avoid leakage
and damage.
• Electronic products of this kind should
never be subjected to moisture or extreme
temperatures.
• Do not use the unit in places where it
can be exposed to water, moisture and dust.
• If necessary, clean the unit with a piece
of cloth dampened with water only (be sure
the AC power cord is disconnected from the
power supply).
• When pick up the CD disc, always hold
the edge of the disc, never touch the surface
of the disc, it would scratch the disc surface
and may occur sound distortion or raise read-
ing problem.
ACCESSORIES
Radio player 1 pc
Instruction manual 1 pc
Warranty card 1 pc
Consumer information 1 pc