Binatone RRCd-1801 - Инструкция (Страница 4)

4 44 44
Rice Cooker RCD-1801
Please read the safety instructions carefully before using this appli-
ance. Please retain the instructions for future reference. Please retain the instructions for future reference. Please retain the instructions for future reference. Please retain the instructions for future reference. Please retain the instructions for future reference.
DESCRIPTION OF THE
APPLIANCE
1. Housing
2. Inside bowl
3. Steam basket
4. Lid
5. ON/OFF key
6. Red indicator light
7. Yellow indicator light
8. Power supply cord socket
9. Measuring cup
10. Spatula
11.Power supply cord
a. Power supply cord connector
b. Mains plug
12. Heating element
BEFORE USING
THE APPLIANCE
Unpack the rice cooker and remove all the pack-
ing materials. Clean the inside bowl (22222) with
warm soapy water and dry it up thoroughly.
Make sure the rice cooker is unplugged.
OPERATING MANUAL
1. Use the measuring cup (99999) to take the required
amount of rice. Put the rice into the inside bowl (22222)
and add some warm water. Follow the rice manu-
facturers’ recommendations to determine the best
water-to-rice ratio. Place the inside bowl (22222) into
the housing (11111). Turn the bowl gently sideways to
make sure it sits flat inside appliance.
Note: when putting the inside bowl (2) into the housing (1)
take care that the bowl (2) stays in an upright
position and has a uniform contact with the heating
element. Failure to meet this requirement may result
in the cooker malfunction.
Advise: drier, fluffier rice is obtained by pre-washing rice. Reduce
water amount slightly to compensate if pre-washed.