Binatone HD-1411 - Инструкция (Страница 6)

6
the appliance and termination of warranty.
Always supervise the equipment while in use.
To avoid a circuit overload, do not operate any other high
voltage equipment on the same circuit.
Always unplug the appliance after use, before
moving and before cleaning it.
Never pull the cord to disconnect the appliance, instead
grasp the plug and pull it to disconnect.
Do not allow the cord or the machine itself to come in
contact with hot surfaces.
Position the equipment and the cord so that nobody can
accidentally overturn the equipment.
Do not use the appliance if it has been dropped, or it has
a damaged power cord or plug. Do not modify or repair
the machine yourself.
Do not dismantle the appliance as improper assembly might
result in an electric shock during the subsequent use of the
equipment. Repairs should only be done by autho-
rized service centers.
Do not use the appliance where the air may contain vola-
tile flammable substances.
This equipment is intended for household use only, not for
commercial or industrial use.
Please follow all the requirements of this guide.
Do not use the appliance if it has mechanical defects (dents,
cracks etc.), get it checked by the nearest authorized ser-
vice center.
SPECIAL SAFETY MEASURES
Please prevent foreign substances from getting
inside the hairdryer as it may result in engine
failure and premature failure of the appliance.
As well as electric shock.
Never cover the appliance when in use, take
care to always keep the air filter uncovered
and clean.
Always switch the appliance off prior to placing it aside even if
only for a short period of time.
Avoid direct contact between attachments and the skin of the
head.
Do not use the appliance near the sink or other water sources.
For additional protection it is recommended that you install a
safety shut off protection device with the rated actuating cur-
rent not exceeding 30 mA, into the bathroom’s electrical cir-
cuit. We recommend that you consult a specialist.
This appliance is equipped with an automatic overheating pro-
tection feature. When overheated, the appliance switches off
automatically. Unplug the appliance from the power socket.
Cool the device off for several minutes and then switch it on
again. Prior to switching on again please ensure that the
hairdryer’s filter is not clogged with fluff, hair, etc. Clean the
grille, if necessary, as described in the instructions.