Binatone HM-351 - Инструкция (Страница 4)

4
Mixer HM 351
Please read the safety instructions carefully before using this
appliance. Please retain the instructions for future refer
ence.
DESCRIPTION
OF THE APPLIANCE
Picture A:
1. Housing.
2. Speed control
3. Attachments’ automatic eject button
4. Turbo regime button
5. Steel beating whisks
6. Steel dough kneading attachments
7. Washer
8. Small aperture to fix attachments
9. Large aperture to fix attachments
10.Power cord
BEFORE USE
Remove all packing materials from the ap
pliance and clean the appliance as mentioned
in this manual.
OPERATING INSTRUCTION
1 . Select the attachments you intend to use.
2. Before fixing the attachments, check that the
speed selector (2) is in position «0» and the
power cord (10) is disconnected from the
supply outlet.
3. Beating whisks (5) can be fixed in random
order. Fix them into apertures for attachments
till a click is heard (8 & 9).
4. Dough kneading attachments (6) can be installed only accord
ing to the following procedure: attachment with a washer
(7) has to be fixed into the large aperture for attachments
(9), and the second attachment (without a washer) shall be
fixed into the small aperture (8). Both attachments shall be
fixed until a click is heard.
5. Before switching the appliance on, make sure that both attach
ments are fixed properly!
6. Connect the appliance to the power outlet and set the speed
selector (2) to the desired setting to start operation of the ma
chine. Always start operating the machine at the lowest speed
gradually increasing the speed.