VICONTE vc-4300 - Инструкция (Страница 6)

6
SELF-CLEANING SELF-CLEANING SELF-CLEANING
SELF-CLEANING
 It is important to apply the self-cleaning function at least every two weeks to remove scale deposit.
 The harder the water the more often the iron should be self-cleaned.
 Fill water reservoir up to the maximum level and then close it.
 Set the temperature control to its maximum position “MAX”.
 Insert the main plug into the wall socket.
 Allow the iron to heat up until the indicator light goes out.
 Holding the iron horizontally over the sink then set the variable steam control into position “3” and press the self-
cleaning button.
 Boiling water and steam will be ejected from the holes in soleplate with Impurities washed out. Rock the iron forwards
and backwards during this operation.
 Set the steam control to the minimum position “0” after emptying the water reservoir.
 Repeat self-cleaning if you notice that much impurity has been washed out.
 Move the iron over an old (preferably) piece of cloth. This to ensure that the soleplate will be dry during storage.
 Unplug and allow the iron to cool down before storing it.
STORAGE STORAGE STORAGE
STORAGE
 Empty the water tank then wrap the cord around the heel rest.
 To protect the soleplate, store the iron in an upright position on its heel rest.
SPECIFICATION SPECIFICATION SPECIFICATION
SPECIFICATION
Power supply 230 V, 50 Hz
Power 1800 W
Net/Gross Weight 1.12 kg / 1.32 kg
Gift box dimension (L x W x H) 300 mm x 135 mm x 160 mm