JVC KD-AVX77 - Инструкция (Страница 24)

24
ENGLISH
Menu item Selectable setting/item
Fader/Balance
Fader:
Adjust the front and rear
speaker output balance.
Balance:
Adjust the left and right
speaker output balance.
♦ F06 to R06; Initial 00 (fader)
♦ L06 to R06; Initial 00 (balance)
[ 5 / ∞ ]: Adjusts fader.
[ 2 / 3 ]: Adjusts balance.
[ ]: Resets the adjustments.
• When using a two-speaker system, set the fader to the center (00).
Volume Adjust * 1 Adjust and store the auto-adjustment volume level for each source, comparing
to the FM volume level. The volume level will automatically increase or decrease
when you change the source.
• <Fix> appears when an FM broadcast is selected as the source.
♦ –12 to +12; Initial 00
Subwoofer Level You can adjust the output level of the subwoofer when it is activated.( 17)
♦ –06 to +08; Initial 00
High Pass Filter ♦ Through
♦ On
: Select when the subwoofer is not connected.
: Select when the subwoofer is connected.
Crossover Select the crossover frequency between the front/rear speakers and the
subwoofer.
♦ 80Hz, 120Hz, 150Hz
Amplifier Gain * 2 You can change the maximum volume level of this unit.
♦ Off
♦ Low Power
♦ High Power
: Deactivates the built-in amplifier.
: VOL 00 to 30 (Select this if the maximum power of the
speakers is less than 50 W.)
: VOL 00 to 50
Rear Speaker * 3 You can activate/deactivate the rear speakers.
♦ Off, On
* 1 For “DISC/USB”: You can make the adjustments separately depending on the audio format—Dolby digital and
the others.
* 2 The volume level automatically changes to “30” if you change to <Low Power> with the volume level set higher
than “30.”
* 3 This setting takes effect only when Dual Zone is activated. ( 43)
Initial: Underlined
Dragging also makes
adjustments.
EN_KDAVX7755[EE]f.indb 24 EN_KDAVX7755[EE]f.indb 24 09.3.27 2:56:28 PM 09.3.27 2:56:28 PM