TELEFUNKEN TF-SP5302 - Инструкция (Страница 11)

Operation
Operation
11
with 3G, while out of network
coverage, you must disable the
transmission of data in order to
free the system from constant
attempts to register in the
network. This is recommended
to prevent braking system and a
long battery life.
• Impossibility of 3G-
connection can be caused by
the lack of 3G coverage in place
where you are staing, and in
this case it is not a defect of the
device.
A-GPS
• A-GPS function enables
you to determine the coordinates
of the location of mobile devices
and display it on the map.
Determination of location is
performed via cellular connection
channel and/or Wi-Fi.
• Click the applications menu
button in the top right corner
of the main screen, in the tab
“Applications” select “Settings”. In
“Location services” put a tick next
to the option “Google’s location
service” and remove the tick for
the option “GPS satellites». Now
when you start working with map
application (Google Maps), after
clicking on the
icon the map
will display the location of your
device.
This unit is equipped
with a GPS module, that allows
to determine your coordinates
without connection to a Wi-Fi
network or cellular connection.
Connect the memory
card
This smartphone is equipped
with a slot for memory cards
microSD. The maximum
supported card capacity - 32
GB. After properly installing a
memory card, this device detects
it automatically. To safely remove
the memory card, follow these
steps: click the applications menu
button in the top right corner
of the main screen, in the tab
“Applications” select “Settings”,
select “Storage”, click on “Eject
SD-card” and complete the
transaction. Press on the card
until it clicks, then pull it out of
the slot.
Install the card into
the slot in the proper direction
and side. For proper operation
of the device, use licensed
MicroSD cards of well-known
manufacturers. Avoid the use
of counterfeit cards by dubious
brands.
Connecting in USB-drive
mode
• Connect the USB connector
of a PC to the MicroUSB port of
this unit with a microUSB cable.
Click “Turn on USB storage” at
the bottom of the screen. After a
while the device is detected as a