Vitek VT-1533 - Инструкция (Страница 6)

7
MAINTENANCE AND CLEANING
1. The power supply must be disconnected before cleaning.
2. Cool the oil completely. Oil or fat retains its temperature for a long while after use. Do not attempt to
move or carry the fryer while it is still hot.
3. Oil can be reused several times. Get the maximum use from your fryer by always having it ready of use.
One way of doing this is to keep the cooled and strained oils inside ready for use. One way of doing this
is to keep the cooled and strained oils inside ready for the next trying session with the lid acting as a
dust cover.
4. Oil should be filtered after each use.
5. Follow the arrow sign at the edge of the bowl to pour oil.
6. After drafting the oil, the fryer should be wiped out with absorbant paper then with a damp cloth and a
little washing up liquid and finally with a dry cloth. The interior of the fryer has a plain aluminium surface.
To avoid damage, no abrasives or sharp instruments should be used.
7. The exterior can be cleaned with a damp cloth. Never use abrasives or scouring pads.
8. The basket can be washed in warm soapy water.
SPECIFICATION
Power requirement
230/240 V ~ 50 Hz
Max. power 2000 W
Oil capacity 2,1 l.
Food capacity 0,8 kg.
SERVICE LIFE OF THE DEEP FRYER NOT LESS THAN 5 YEARS
6
РУССКИЙ ENGLISH
СОСТАВНЫЕ ЧАСТИ:
1. Кнопка фиксации ручки корзины
2. Ручка корзины
3. Корзина
4. Кнопка фиксатор крышки
5. Окно для контроля
6. Фильтр
7. Корпус
8. Индикатор питания
9. Индикатор температуры
10. Регулятор температуры
11. Место хранения шнура
12. Сетевой шнур
СХЕМА ПРИБОРА
FIG. 6
1533.qxd 05.11.03 17:55 Page 12