Hyundai H-DVR01 - Инструкция (Страница 5)

5
Instruction Manual
the marking on the unit casing to insert
the card with correct side. If the memory
card is not inserted, LED-indicator will be
fkashing quickly in green.
• Set the power switch to ON position
to switch on the unit. LED-indicator
will be blue showing the readiness for
recording. If you want to switch off the
unit, set power switch to OFF position;
LED-indicator will turn off.
Recording
• Manual recording: when MODE
switch is set to OFF position. After you
switch on the unit, press Record button
to start recording; LED indicator will
flash slowly in green. To stop recording
press Record button. The file will be
saved in the memory card in *.AVI format
and the unit will go to standby mode;
LED indicator will be blue. To restart
recording press Record button while LED
indicator is in blue; the unit will go back to
recording mode.
When the card is filled up, LED-
indicator will be green. Old files will be
deleted and the new files will be recorded
instead.
• Motion detector recording: set
MODE switch to ON position. Turn on
the unit by setting power switch to ON
position; the unit will go to recording
mode if there is image motion in front of
the lens. If there is no motion within 20
seconds, then the unit will automatically
go to standby mode. In standby mode, if
there is motion again, the unit will go to
recording mode.
• After recording the files are
saved automatically. In case of a
prolonged recording, video clips will
be automatically saved after each 10
minutes in files 200-400 Mb.
• Before removing memory card stop
recording. Press on the card until a click
to remove it.
MicroSD capacity supported: up
to 32 Gb. For correct and satisfactory
operation, licensed MicroSD memory
cards of famous brands should be used
with this unit. Avoid using memory cards
of unknown brands.
Time and date display
• You can set the real time and date
to be displayed in the recorded video.
Create a text file with name TAG.txt in
the root directory of the MicroSD memory
card that you use with this unit. The text
file should contain following:
[date]
ГГГГ/ММ/ДД
ЧЧ:ММ:СС
e.g.: [date]
2009/08/24
19:20:00
• After you switch on the unit into
standby mode, (LED-indicator is blue),
the data from the text file will be saved in
the memory of the unit.
Saving and playing files
• After recording is over, connect this
unit to a PC via the USB cable and copy
the data to the PC from the memory card
used with this unit. You can also use a
card-reader to read files directly from the
memory card.