Sven STL-2000 - Инструкция (Страница 21)

1. BRIEF INTRODUCTION
With the latest TFT LCD display panel technology, a powerful and highly reliable signal processing drive, sleek and elegant design, this
LCD television set offers you a colorful and vivid high definition picture, with a sweet and musical sound quality and a user friendly on
screen menu display. This is enhanced by an environmentally protective lack of radiation that leads to a new world of advancement and
life style.
Main Features
~ Television, video display, and PC monitor; three in one
~ Higher brightness, 170° wide view angle
~ 200 program memory
~ Super auto adaptive digital comb filter
~ Super dynamic noise reduction
~ Super picture edging processor
~ Translucent on screen menu, auto search
~ Full function remote control
2. SAFETY AND RECOMMENDATIONS
~ How to Power On/Off.
Connect the AC Power cord , AC adapter and TV, the indicator will turn red;
Press the «Stand by» button; then the indicator will turn blue;
Press the «Stand by» button again; the receiver will again switch to stand by mode;
Turning off the power switch under the unit.
Z
Pull out the plug that connects to the AC power supply when the receiver is working normally will cause an immediate power shut
down of the unit;
“Stand by” mode is a type of energy saving mode and still consumes some power even if the screen is not lit on, energy can be saved
by shutting off the power completely with the switch under the unit.
~ Keep good ventilation around the unit; do not place the TV under direct sunlight or near other heat sources because it could dam
age the receiver and cause it to malfunction.
~ Do not hit or squeeze the LCD screen with hard or sharp objects; clean the receiver with a soft cloth soaked with a diluted neutral clean
ing agent; do not clean the receiver with any type of industrial solvents or a chemical cloth. For the sake of safety, disconnect the power
plug while cleaning.
~ Avoid any damage to the AC power cord.
~ Do not open the cabinet of the receiver because there are high voltage circuits inside, do not touch any circuit components inside as
this will most likely cause skin burn or a life threatening electric shock.
3. INSTALLATION
Accessories
1) AC power cord – 1 pc
2) VGA connecting cable – 1 pc
3) AC adapter – 1 pc
4) S VIDEO connecting cable – 1 pc
5) Remote control – 1 pc
6) VIDEO connecting cable – 1 pc
7) User’s manual – 1 pc
Eng SVEN STL 2000
21