VARTA V-GPS53C - Инструкция (Страница 8)

Instruction Manual
8 www.varta-electronics.ru
CAMERA
• Track recording (DVR) is used for saving
the route image in the memory card. 2 modes
are available: video and photo. Please insert a
memory card into the additional slot of this unit.
• Click Camera in the main unit, the track
record menu will be displayed. Click icon to
switch between video and photo. symbol in
the top left corner shows that the current mode is
video recording;
symbol shows photo mode.
Click OK icon or touch camera shortcut button on
the unit to start recording; click this icon again to
stop. Click
and to go to previous or next
photo. Click icon, than OK icon to play a re-
corded video. Click repeatedly and icons
to zoomin or out the image. Click to exit the
menu.
SYSTEM SETUP
Click SETTING to access system setting
menu consisting of following items: Backlight,
Volume, Language, Date Time, Calibration, GPS
info, System information, FM, Restore settings,
Power and Navi Path. Click any of the icons to
go to corresponding setting. Click
to switch
between setting menu pages.
Backlight
Click Backlight to access backlight setup
menu. In this menu click and to select
backlight time mode. Click and to adjust
the brightness of backlight; you can also click
brightness bar (
) to adjust brightness
level. Click to exit the menu.
Volume
Click Volume to access volume setup menu.
In this menu click and to select screen
tap sound mode. Click and to adjust the
sound volume level; you can also click volume
bar (
) to adjust volume level. Click
to exit the menu.
Language
Click Language to access language menu. In
this menu click the needed language to select
the system menu language. Click
to exit the
menu.
Date and time
Click Date Time to access time setting menu.
In this menu click and to select time zone.
Click and to adjust year, month, date, hour
and minute. Click to exit the menu.
System info
Click System info to show system information.
Click to exit the menu.
Restore setting
Click Restore set. Click YES to confi rm restor-
ing of all settings to default values. Click NO to
cancel.
Calibration
Click Calibration. Click YES to confi rm calibra-
tion of the touch screen. Click NO to cancel.
After your confi rmation, a cross appears in the
center of the display and a tip above: “Carefully
press and briefl y hold stylus on the center of the
target. Repeat as the target moves around the
screen”. Press the cross at place 1, then it will
move to another corner, press it again. Now it will
move to the third position, press it, then the last
but one and the last position. After you pressed