Philips HP3641 - Инструкция (Страница 10)

3 Adjust the lamp housing
◗
Turn the height adjustment ring to the left, pull the lamp housing
up or push it down to the desired height and then lock it into
position by turning the ring to the right (fig. 11).
◗
To tilt the lamp housing upwards or downwards, grasp it by its
handgrips and move it to the desired position (fig. 12).
◗
You can also turn the lamp housing to horizontal or vertical
position by grasping it by the handgrips and turning it to the
required position (fig. 13).
◗
Make sure the pedestal base is horizontal. If it is placed at an
angle, the appliance will switch off automatically (fig. 14).
4 Sit or lie down at the right distance from the appliance.
- At a distance of 40-50 cm to the body, the InfraCare treats an area
of about 40 cm by 60 cm. At a larger distance, the area treated
becomes larger and the infrared light and therefore the warmth
less intense. At a smaller distance, the area treated is smaller and
the infrared light and therefore the warmth more intense.
- Make sure the distance between your body and the appliance is
large enough to prevent accidental contact with the hot filter.
- Choose a distance at which the heat is comfortable.
B Please note that the warmth of the appliance does not reach its full
intensity until several minutes after switching the appliance on.This does
not mean, however, that the appliance is not effective during these first
minutes.
Duration of treatment
The duration of the treatment depends on the person to be treated
and the type of use. We recommend a few short treatments a day, e.g.
2 treatments of 15 minutes, on a number of consecutive days to get a
result.
B Practice has shown that a few short treatments a day produce a better
result than one longer treatment.
Always consult your doctor in case of doubt!
ENGLISH 10