Instruction manual – Инструкция по эксплуатации Hyundai H-1526
Страница 3
2
3
Instruction manual
Instruction manual
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.
• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct
sunlight, too high or low temperature or humidity.
• If you are not going to use the unit within
a long period of time, remove the batteries to
avoid their leakage.
• Do not disassemble the unit yourselves.
Refer servicing to qualified service personnel.
Power supply
Battery operation
• Insert 1x9V battery (not included) to the
terminal inside the battery compartment. Your
set will not work normally from the battery
supply, but there is now the advantage that, in
case there is a mains current failure, your clock
will continue to work. The clock display will not
light up, the clock time will be held in the clock
memory by the battery back-up system.This
enables you to move the set from place to place
without re-setting the clock every time. The
battery back-up system is only meant to be used
from short temporary power failures. For longer
durations the battery may become exhausted or
there may be some deviation in accuracy.
• When the battery is exhausted, it should
be removed from the set to prevent leakage.
If you do not wish to take advantage of the
battery back-up system, your set will work
normally without a battery. However, if
disconnected from the mains, the clock figures
will flash when the mains are re-connected and
you must re-set the clock.
AС operation
• The appliance is for household use only.
• Before the first connecting of the appliance
check that voltage indicated on the rating label
corresponds the mains voltage in your home.
• Insert the plug into the power supply.
• The set is now working as an electronic
clock. Figures will blink on the display, showing
that you should set the clock.
Setting the clock
• Press and hold TIME button.
• Do not release TIME button; press HOUR
button or MINUTE button to set the clock
display to the correct time.
• Release all the buttons when finished the
setting.
Radio operation
Tuner operations
• Slide AUTO/OFF/ON switch to ON and
turn on the volume.
• Slide AM/FM switch to AM or FM position.
• Adjust the program using TUNING regulator.
• Use VOLUME regulator to adjust volume
level.
Antenna
• The unit has a built-in ferrite antenna
for AM band, and its recertion is directional.
Change the orientation of the unit to improve
the reception.
• The unit is equipped with an FM flexible wire
antenna on the back of the unit. The antenna
should be fully extended for best reception.
Sleep to music
The radio can be set to play and to switch off
automatically after a preset time.
• Slide AUTO/OFF/ON switch to OFF or
AUTO position.
• Press SLEEP button once.
• You can have 59 minutes playing the radio
to accompany you to sleep.
• To set for a desired period of sleep
(maximum 1 hour 59 minutes), simply press
and hold SLEEP button and then press HOUR
button or MINUTE button to set the desired
period of the sleep function.