Vitek VT-3514 RU - Инструкция (Страница 5)

ENGLISH
5
Displaying the date
In the current time mode pres the << button
once to display the year, twice – to display
the date; In 5 seconds the unit will return to
the current time display mode.
Daylight saving time
Press and hold the >> button for more than
3 seconds to transfer to the daylight saving
time and back.
Setting the alarm actuation time (AL.1
and AL.2)
In the current time mode press and hold the
AL.SET button for more than 2 seconds
to enter the alarm actuation time setting
mode.
Digits of the hour will start flashing on the
display. Use the <</>> buttons to set the
hour.
Press the AL.SET button. Digits of the min-
utes will start flashing on the display. Use the
<</>> buttons to set the minutes.
Press the AL.SET button. Symbols of the
alarm actuation time will start flashing on the
display. Use the <</>> buttons to select the
desired mode:
1 – 5: alarm actuation from Monday to Fri-
day;
1 -7: alarm actuation from Monday to Sun-
day;
6 - 7: alarm actuation on Saturday and Sun-
day;
1 - 1: alarm actuation once a week.
The date and time of the second alarm is set
in the same way
Note: If during 30 seconds the <</>> but-
tons are not pressed, the unit will switch to
the current time display mode.
Alarm signal selection, alarms on/off
As the alarm signal you can select: radio or
buzz , by setting the ALARM switch to the
corresponding position.
Set the DIMMER switch to the AUTO OFF
position. In this case when the alarm is actu-
ated the display will switch on as well.
To switch on the alarm press the AL ON/OFF
1 or AL ON/OFF 2 button correspondingly.
The alarm actuation symbol (AL 1 or AL 2)
will appear on the display. To switch off the
alarm press the corresponding button once
again.
Alarm snooze
Alarm signal will continue for 30 minutes if
you do not press any buttons.
You can switch off the alarm signal for 9 min-
utes by pressing the SNOOZE button. In 9
minutes the alarm signal will be repeated.
To switch off the alarm repeat press the ON/
OFF button. If radio is selected as the signal,
it will switch off automatically in 30 minutes.
Set the DIMMER switch to the AUTO OFF
position. When switching on the display by
means of the SNOOZE/SLEEP button,
switch on the alarm repeat function, the
alarm signal and the display will switch off.
Automatic switching off the radio
You can set the time after which the radio
will be switch off automatically. In the radio
mode press the SNOOZE/SLEEP/NAP but-
ton, “90” will start flashing on the display; it
means that the radio will be switch off au-
tomatically in 90 minutes. To reduce time,
press the SNOOZE/SLEEP/NAP button,
symbols 60-30-15 will be displayed. In the
preset time the radio will be switch off. To
switch off the radio before the preset time,
press the ON/OFF button.
Timer
In the current time mode press the SNOOZE/
SLEEP/NAP button, “n 90” will appear
on the display. To reduce the time after
which the timer will be actuated, press the
SNOOZE/SLEEP/NAP button. You can set
time from 90 to 10 minutes with a 10-minute
step. When the set time expires you will hear
a signal, which will continue for 30 minutes,
and after that will be switched off automati-
cally. To switch off the signal press the ON/