Vitek VT-5017 BK - Инструкция (Страница 7)

ENGLISH
7
Horizontal
Use the VOL+
► / VOL- ◄ buttons to horizontally
display the current picture. To cancel the
horizontal mode, press the buttons once again.
PRESET
Use the CH+
▲/CH-▼ buttons to select one of
the following items: POSITION, REMEMBER,
BAND, SWAP, FINE, SEARCH, AUTO-SEARCH.
Position
Use the VOL+
► / VOL- ◄ buttons to select
number of the position
Remember
Use the VOL+
► / VOL- ◄ buttons to store the
position number in memory (Remember - on)
Band
Use the VOL+
► / VOL- ◄ buttons to select one
of the following bands: MB-, MB-2, DMB
Swap
Use the VOL+
► / VOL- ◄ buttons to select
number of the position to swap and press the
MENU button to confirm the swap
Fine
Use the VOL+
► / VOL- ◄ buttons to fine tune
the position frequency
Search
Use the VOL+
► / VOL- ◄ buttons to start
searching of positions. When the position with
strong signal level is found the color of the
search indication will change.
Auto-search
Use the VOL+
► / VOL- ◄ buttons to start auto-
searching of positions, starting from 0 in turn
in MB-, MB-2, and DMB bands. When the
position with strong signal level is found, the
search will stop and the position will be stored in
memory.
Note: Selection of menu items and their
adjustment can be performed by the navigation
buttons on the remote control
To get a clear picture we recommend doing the
following:
. Select the desired language of the on-
screen menu
2. Set the proper color system and sound
system
. Perform auto-search
Note: To ensure better reception try several
location variants of the telescopic antenna.
Bad quality of picture, appearance of noises
is not failure symptoms. In case of weak
signal while using a telescopic antenna try to
connect the external antenna by means of the
corresponding adapter.
USB/CARD mode
Your TV-set supports MS, MMC, SD memory
cards and USB devices (capacity not more than
2 Gb) and plays back JPEG/MP/WMA/VCD/AVI
files.
Note: Broken playback of picture is possible at
flow rate more than000 Kbit/sec.
. Select the USB/CARD mode using the
MODE button.
2. Connect the external device. The following
menu will appear on the screen of your TV-
set.
. Use the ◄ / ► buttons to select PHOTO/
MUSIC/VIDEO. Press the ОК button to
confirm.
4. Use the ◄ / ► / ▲ / ▼ buttons to select
a folder from which you want to play back
files. For MP/WMA files: press the OK
button to playback the first track.
For JPEG files: select the desired file using
the navigation buttons and press the OK
button to view.
5017IM.indd 7 06.02.2008 14:33:37