ZELMER 5000 - Инструкция (Страница 69)

It is necessary to exchange the bag when you have noticed that your vacuum cleaner cleans
noticeably worse, that the bag full indicator is burning or if the safety-valve has tripped.
If the safety-valve has opened and it seems to you that the bag is not full yet we recommend to
exchange the bag because a fine dust must have clogged the bag surface pores which in turn
decreased the vacuum cleaner suction-power significantly. By picking up wool waste the bag can be
full although the full bag indicator does not say anything. In this case you should also exchange the
bag for a new one.
Do not vacuum with no bag ( the cover will not shut if the bag is not in its place ).
− take the hose out of the vacuum cleaner inlet hole,
− release the catch of the front cover (1) and open it,
− take out the bag catch together with the bag by
pulling it upwards (2),
− shut the SAFBAG bag cover in order to cover the
hole of the soiled bag,
− while holding the bag plate, bend it upwards and
pull the bag out of the bag catch, guides (3),
− slide the plate of a new bag into the bag catch guides. Installation direction of
the bag is indicated by an arrow on the bag,
− insert the catch together with the bag into the vacuum cleaner chamber, so
that the protrusion of the bag plate comes into the hole on the chamber wall.
− close the cover by pressing it until you hear a characteristic crack.
S A F B A G ― S PACE A CTION F ILTRATION BAG
This dust bag has been made of a special multi-layer porous material In comparison with a traditional
paper dust bag, it is characterized by much better technological and economical parameters:
− Due to its high plasticity, it fills the vacuum cleaner dust bag
container closely, which makes it possible to absorb a few times
more dust (depending on the size of the vacuum cleaner dust bag
container);
− The span of time between the fitting of a bag and removing it
increases by 3 times on average, due to which, the use of the
vacuum cleaner becomes more economical;
− It shows much better filtration parameters, which results in:
− more effective dust retention,
− streamlining the airflow (which increases the power of the engine, as
well as its durability),
− the vacuum cleaner still retaining a high suction power, even though
the bag is being gradually filled up,
− a significant increase in health protection, as the, outcoming air is much better filtered;
− hygienic operation due to a closed single use bag;
− the material of which the bag was made has acquired all the ecology-related certificates.
HOW TO EXCHANGE THE INLET FILTER
− open the vacuum cleaner like during
exchanging the bag,
− pull the filter guard out of the body, take the
used filter out, insert a new one so that the
filter edges exactly fit the filter guard and
close the vacuum cleaner,
Fold line
Cover
SP AC E AC TIO N
FI LTR AT IO N
SP AC E A CT IO N
FILT RAT IO N
S PA CE AC TIO N
FILT RA T ION
SP AC E A CT IO N
FIL TR AT ION
SP ACE
AC TIO N
FIL TR AT IO N
SP AC E AC TIO N
FI LT R A TIO N
SP AC E A C T ION
FIL TR AT IO N
S PAC E AC TIO N
FIL TR AT ION
SP AC E A C T IO N
FIL TR AT ION
SP AC E AC TIO N
FIL TR AT IO N
SP ACE
A C TIO N
FIL TR AT ION
SP A C E AC TIO N
FIL TR AT IO N
SP AC E A C TI ON
FI LT RAT ION
SP AC E AC TI ON
FI LT RA TIO N
SP A C E AC TI ON
FI LT R A TIO N
Set of SAFBAG-s
No. 49.4220
2
1
69