Cleaning and care – Инструкция по эксплуатации ZELMER 01z015
Страница 56
56
Start the vacuum cleaner by moving the on/off slider
●
(5) to the
on position (see the fig. by the text). The vacuum cleaner is
now operational.
If there is a need for it, install the crevice nozzle
●
(6) on the
air-inlet
(10).
The control light
●
(4) will turn on when the dust container (2) is
full (the MAX level on the dust container is exceeded).
After the vacuuming empty and clean the dust container
●
(2).
Effective vacuuming of flat surfaces may be achieved without
the crevice nozzle
(6). The nozzle helps to remove dust from
inaccessible places, e.g. near the skirting or from slits.
In order to empty the dust container:
Turn off the vacuum cleaner by moving the on/off slider
●
(5) to
its off position.
Remove the power cord from the cigarette lighter socket.
●
Press the lock button
●
(3), open the dust container (2) and empty it.
CLEANING AND CARE
1. Turn off the vacuum cleaner by moving the on/off slider
(5) to its off position.
2. ATTENTION: Remove the power cord plug from the cigarette lighter socket.
3. Wait for the device to cool off a bit.
4. You can clean the external surfaces of the device using only a dry or lightly moist
cloth, paying great attention not to get any electricity conducting elements (switch,
plug) wet.
5. Press the lock button
(3) and then gently pull the dust container (2).
6. Remove the body of the engine protection filter
(8) with the filter (7) by pulling the
PULL handle.
7. Empty the dust container
(2), and if there is such a need you can wipe it with a dry or
lightly moist cloth.
On position
Off position