JVC KD-LH917 - Инструкция (Страница 51)

51
ENGLISH
To be continued....
Inserting a disc
• When a disc is inserted upside down, the
control panel moves down, and the disc
automatically ejects from the loading slot.
• If you keep the control panel open for about
1 minute, (beep sound when the “Beep”
setting is turned “On”—see page 37) the
control panel returns to its previous position.
• Do not insert 8 cm discs (single CD) and
unusual shape discs (heart, flower, etc.) into
the loading slot.
Playing a disc/SD card
• While playing an audio CD: If a title has been
assigned to the audio CD (see page 41), it will
be shown on the display.
• While fast-forwarding or reversing on an MP3
or WMA track, you can only hear intermittent
sounds.
• While playing an SD card, the playback order
may differ from other SD players.
• This receiver may be unable to play back
some SD card due to their characteristics or
recording conditions.
• This receiver cannot play back mini SD card
and MMC.
• If the inserted SD card does not have the
correct files, “SD” is skipped.
Playing a CD-R or CD-RW
• Use only “finalized” CD-Rs or CD-RWs.
• This receiver can play back only the files of
the same type which is first detected if a disc
includes both audio CD (CD-DA) files and
MP3/WMA files.
• This receiver can play back multi-session
discs; however, unclosed sessions will be
skipped while playing.
• Some CD-Rs or CD-RWs may not play
back on this receiver because of their disc
characteristics, and for the following causes:
– Discs are dirty or scratched.
– Moisture condensation occurs on the lens
inside the receiver.
– The pickup lens inside the receiver is dirty.
– CD-R/CD-RW on which the files are
written with “Packet Write” method.
– Improper recording conditions (missing
data, etc.) or media conditions (stain,
scratch, warp, etc.).
• CD-RWs may require a longer readout time
since the reflectance of CD-RWs is lower
than that of regular CDs.
• Do not use the following CD-Rs or CD-RWs:
– Discs with stickers, labels, or protective seal
stuck to the surface.
– Discs on which labels can be directly
printed by an ink jet printer.
Using these discs under high temperatures or
high humidities may cause malfunctions or
damages to discs.
EN50-53_LH917[EE]f.indd 51 EN50-53_LH917[EE]f.indd 51 12/24/04 12:36:26 PM 12/24/04 12:36:26 PM