More about this unit, English 50 general, Fm/am/rds – Инструкция по эксплуатации JVC KD-DV7307

Страница 50: Disc/usb

Advertising
background image

ENGLISH

50

General

Turning on the power

• By pressing SRC on the unit, you can also turn on the

power. If the source is ready, playback also starts.

FM/AM/RDS

Storing stations in memory

• During SSM search...
– Received stations are preset in No. 1 (lowest

frequency) to No. 6 (highest frequency).

– When SSM is over, the station stored in No. 1 will

be automatically tuned in.

• When storing stations, the previously preset stations

are erased and stations are stored newly.

FM RDS operations

• Network-Tracking Reception requires two types of

RDS signals—PI (Programme Identification) and AF
(Alternative Frequency) to work correctly. Without
receiving these data correctly, Network-Tracking
Reception will not operate correctly.

• If a Traffic Announcement is received by TA Standby

Reception, the volume level automatically changes to
the preset level (TA VOL) if the current level is lower
than the preset level.

• When Alternative Frequency Reception is activated

(with AF selected), Network-Tracking Reception is
also activated automatically. On the other hand,
Network-Tracking Reception cannot be deactivated
without deactivating Alternative Frequency
Reception. (See page 44.)

• If you want to know more about RDS, visit

<http://www.rds.org.uk>.

More about this unit

Disc/USB

General

• In this manual, words “track” and “file” are

interchangeably used.

• This unit can also play back 8 cm discs.
• This unit can only play back audio CD (CD-DA) files if

different type of files are recorded in the same disc.

• This unit can display only one-byte characters. No

other characters can be correctly displayed.

• When a disc is inserted upside down, “PLEASE” and

“EJECT” appear alternately on the display. Press

0

to

eject the disc.

• If the ejected disc is not removed within 15 seconds,

the disc is automatically inserted again into the
loading slot to protect it from dust. Playback starts
automatically.

• After ejecting a disc or removing a USB device,

“NO DISC” or “NO USB” appears and you cannot
operate some of the buttons. Insert another disc,
reattach a USB device, or press SRC to select another
playback source.

• If you change the source, playback also stops.
Next time you select the same source again, playback

starts from where it has been stopped previously.

• While playing from a USB device, the playback order

may differ from other players.

• This unit is compatible with the USB Full-Speed.
• Depending on the shape of the USB devices and

connection ports, some USB devices may not be
attached properly or the connection might be loose.

• When connecting a USB device, refer also to its

instructions.

• Connect one USB device to the unit at a time. Do not

use a USB hub.

• If the connected USB device does not have the correct

files, “NO FILE” appears.

EN48-55_DV7308_001A_1.indd 50

EN48-55_DV7308_001A_1.indd 50

1/18/07 5:14:41 PM

1/18/07 5:14:41 PM

Advertising
Эта инструкция подходит к следующим моделям: