Vitek VT-3497 - Инструкция (Страница 8)

2.Press and hold the TIMER (15) / (42) button for 2 seconds until the " ON" symbol appears.
The LCD display (19) will show two flashing symbols to set the time when you want the system to switch
on.
3.Press the
SEARCH - (7) / (37) or SEARCH + (8) / (38) button to set the hour when you want
the system to switch on.
4.Press the TIMER (15) / (42) button to save the set hour. The LCD display (19) will show two flashing
symbols to indicate the minute when the system will switch on.
5.Press the SEARCH - (7) / (37) or SEARCH + (8) / (38) button to adjust the minutes of the
switch-on time.
6.Press the TIMER (15) / (42) button to cause the " OFF" symbol to appear. The LCD display (19) will
show two flashing symbols for setting the hour when you want the system to switch off.
7.Repeat points 3-5.
8.Press the TIMER (15) / (42) button to save the settings and cause the "TUNER" symbol to appear on
the LCD display (19).
9.Press the SEARCH - (7) / (37) or SEARCH + (8) / (38) buttons to select the playback mode.
10.Press the TIMER (15) / (42) button to save the playback mode. The LCD display (19) will show the
symbol "VOL 15" for setting the desired volume level.
11.Press the SEARCH - (7) / (37) or SEARCH + (8) / (38) buttons to select the desired volume
level.
12.Press the TIMER (15) / (42) button to turn on the TIMER and cause the " " symbol to appear on
the LCD display (19).
Note: Before setting the timer, the digital clock must first be set correctly.
The setting mode will stop if the MEMORY (13) / PROGRAM (45) buttons are not pressed within 10
seconds.
The timer can be set to turn the system on or off. For this, the digital clock must be correctly set.
If the system is in standby mode, it will automatically switch on at the programmed time in either CD
or TUNER mode.
For example: For operation in the TUNER mode, there must be a CD inserted in the system.
SETTING STANDBY MODE (AUTOMATIC DISCONNECTION)
When the system is switched on, the automatic switch-off time can be set to 90 - 80 - 70 - 60 - 50 -
40 - 30 - 20 - 10 minutes. Press the Standby mode (43) button until the desired time appears on the
LCD display (19). The system will switch off after the selected period has elapsed.
Note: If the CD playback time is shorter than the selected period, the music will switch off before the
system disconnects.
THE MAIN FUNCTIONS
SWITCHING ON THE SYSTEM
Press the STANDBY MODE (2) / (36) button to switch on the system. Press the STANDBY MODE (2)
/ (36) button to disconnect the system. The current time will show on the LCD display (19).
SELECTING THE OPERATING MODE
Press the FUNCTION Button (9) / (35) to select the playback mode (CD, Cassette or TUNER).
VOLUME (20) / VOLUME + (39) Button: Press to increase the volume.
VOLUME (18) / VOLUME - (41) Button: Press to decrease the volume.
Note: There are a total of 40 volume levels. The volume level shows on the LCD display (19).
Attention! Listening at high volume can damage your hearing, especially when listening
through headphones.
ENGLISH
7