JVC WR-MG250 - Инструкция (Страница 3)

3
3. Check that there are no scratches or cracks
on the marine case every time you use it.
The marine case must withstand water
pressure with use. Repeated exposure to
pressure eventually leads to material fatigue,
which may result in damage of the marine
case. Every time you use the marine case,
check in advance that there are no scratches
or cracks. If you frequently use the marine
case, be sure to ask for maintenance at the
store of purchase. (There is a charge for
maintenance.)
To protect your camera and ensure optimum use,
keep the examples listed above in mind when
using the marine case.
JVC accepts no responsibility for water leakage or
damage to anything inside the marine case
(camera, SD card, etc.) due to careless usage of
this product. Be sure to follow correct procedures
when using the marine case.
• Anti-fog liquid
• Silicone grease (5 g) x 1
• Silicone cloth
• Drying agent (2 g) x 5
• Strap
You can purchase the following set of expendable
parts.
Please contact your local JVC service
representative.
• O-rings x 2
• Silicone grease (5 g) x 1
• Drying agent (2 g) x 5
• Lens tissue paper (50 sheets) x 1
Accessories
• 2 O-rings
One spare O-ring.
• Base
To attach to the camera.
• Grip
Commercially available
lights and weights can also
be attached.
• Pick
• Screw tightening key
• 2 hexagonal wrenches
Large: for screwing the grip
Small: buckle opener
Maintenance Kit - Sold Separately
(Part Number: MG100_MTKIT)
O-ring
WR-MG250_EN.book Page 3 Thursday, June 4, 2009 11:09 AM