Beko TS1 66020 - Инструкция (Страница 10)

EN
9
• The connection must be in
compliance with national regulations.
• The power cable plug must be easily
accessible after installation.
• The specified voltage must be equal
to your mains voltage.
• Extension cables and multiway plugs
must not be used for connection.
B
A damaged power cable must be
replaced by a qualified electrician.
B
Product must not be operated before
it is repaired! There is danger of
electric shock!
Disposing of the packaging
The packing materials may be
dangerous for children. Keep the
packing materials out of the reach
of children or dispose them of by
classifying
them in accordance
with the waste instructions. Do not
dispose them of along with the normal
household waste.
The packing of your freezer is
produced from recyclable materials.
Disposing of your old freezer
Dispose of your old machine without
giving any harm to the environment.
• You may consult your authorized
dealer or waste collection center of
your municipality about the disposal of
your freezer.
Before disposing of your freezer, cut
out the electric plug and, if there are
any locks on the door, make them
inoperable in order to protect children
against any danger.
Placing and Installation
1. Install your freezer to a place that
allows ease of use.
2. Keep your freezer away from heat
sources, humid places and direct
sunlight.
3. There must be appropriate air
ventilation around your freezer in order
to achieve an efficient operation.
If the freezer is to be placed in a recess
in the wall, there must be at least 5 cm
distance with the ceiling and at least 5
cm with the wall.
If the floor is covered with a carpet,
your product must be elevated 2.5 cm
from the floor.
4. Place your freezer on an even floor
surface to prevent jolts.
5. Do not keep your freezer in ambient
temperatures under 10°C.