Auxiliary functions, Time display – Инструкция по эксплуатации Beko WKB 50831 PT
Страница 50
EN
50
Auxiliary functions
Auxiliary Function Selection Buttons
Select the required auxiliary functions
before starting the program.
C Some combinations cannot be
selected together. (Ex.: Pre-wash
and Quick Wash.
Warning signal on the selected auxiliary
function will light up.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
(Ex.: If you want to select pre-wash first
and then quick wash, pre-wash will be
cancelled and quick wash will remain
active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see, “Program Selection Table”)
C Auxiliary function buttons may differ
according to the model of your
machine.
Pre-wash
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you
save energy, water, detergent and time.
C Pre-wash without detergent is
recommended for lace and curtains.
Quick wash
This function can be used for “Cottons”
and “Synthetics” programs. It decreases
the washing times for lightly soiled
laundries and also the number of rinsing
steps.
Rinse plus
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by
the remainder detergent on the clothes
will be decreased.
Pet hair removal
This function helps you to remove the
pet hairs that remain on your clothes.
When this function is selected, your
machine adds pre-wash and additional
rinsing steps to the normal program
cycle. Thus, pet hairs are removed more
effectively by performing the washing
with more water (30%).
Never wash your pets in your washing
machine.
Rinse hold
If you are not going to unload your
clothes immediately after the program
completes, you may use rinse hold
function and keep your laundry in the
final rinsing water in order to prevent
them become wrinkled when there is
no water in the machine. Press “Start/
Pause” button after this process if you
want to drain the water without spinning.
Program resumes. Your machine drains
the water and program completes.
If you want to spin your laundry that you
left in water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine
drains the water, spins the laundry and
program completes.
Time display
The display shows the time remaining
for the program to complete while a
program is running. Time is displayed in
hours and minutes as “01:30”.
C Program duration may differ from
the values in the consumption
table subject to the changes in the
water pressure, water hardness and
temperature, ambient temperature,
type and amount of laundry, auxiliary
functions selected, and changes in
the supply voltage.
Time delay
With the “Time delay” function you can
delay the program start up to 24 hours.
Time delay can be set with steps of one
hour for the first three hours and with