Beko WMI 71241 - Инструкция (Страница 24)

24 EN
4. The symbol of the step from which
the programme has started appears
on the display (Prewash, Main Wash,
Rinse, Softener and Spin).
Progress of programme
Progress of a running programme is
indicated on the display with a set of
symbols.
Relevant symbol appears on the display
at the beginning of each programme step
and all symbols remain lit at the end of
the programme. The farthermost right
symbol indicates the current programme
step.
Prewash
If the Prewash auxiliary function is
selected, Prewash symbol appears on
the display indicating that the prewash
step has started.
Main Wash
Main Wash symbol indicating that the
main wash step has started appears on
the display.
Rinse
Rinse symbol indicating that the rinsing
step has started appears on the display.
Softener
Softener symbol indicating that the
softener step has started appears on the
display.
Spin
Appears at the beginning of the final
spin step and remains lit during Spin and
Pump special programmes.
C If the machine does not pass to the
spinning step, Rinse Hold function
might be active or the automatic
unbalanced load detection system
might be activated due to the
unbalanced distribution of the laundry
in the machine.
Loading door lock
There is a locking system on the loading
door of the machine that prevents
opening of the door in cases when the
water level is unsuitable.
Door Locked symbol appears when the
loading door is locked. This symbol will
flash until the loading door becomes
ready to open when programme
completes or the machine is paused. Do
not force to open the loading door in this
step. Symbol disappears when the door
is ready to open. You can open the door
when the symbol disappears.
Changing the selections after
programme has started
Switching the machine to pause
mode
Press the Start / Pause / Cancel button
to switch the machine to pause mode.
Pause symbol appears on the display
indicating that the machine is paused.
Start symbol disappears.
F2 F4 F1 F3
Changing the speed and temperature
settings for auxiliary functions
Depending on the step the programme
has reached, you may cancel or activate
the auxiliary functions; see, "Auxiliary
function selection".
You may also change the speed and
temperature settings; see, "Spin speed
selection" and "Temperature selection".
Adding or taking out laundry
1. Press the Start / Pause / Cancel
button to switch the machine to
pause mode. The programme follow-
up light of the relevant step during
which the machine was switched into
the pause mode will flash.
2. Wait until the Loading Door can be
opened.
3. Open the Loading Door and add or
take out the laundry.
4. Close the Loading Door.
5. Make changes in auxiliary functions,
temperature and speed settings if
necessary.
6. Press Start / Pause / Cancel button
to start the machine.
C The loading door will not open if the
water temperature in the machine is
high or the water level is above the
door opening.