Инструкция по эксплуатации Whirlpool AWG 294
Страница 37
FAILURE CODE
FAILURE
INDICATOR
PROBABLE
FAILURE
CORRECTIVE
MEASURES
E02
Lights 1 and
3 blink.
The water
level in your
machine is
below heater.
The pressure
of your water
supply may
be low or
unstable.
Turn on the tap
to the end.
Water supply
may be cut,
check it. If the
problem still
exists, your
machine will
automatically
stop after a
while. Unplug
your machine,
turn off the tap
and consult your
nearest
authorized
service provider.
E03
Lights 1 and
4 blink.
The pump
has failed or
the pump filter
is obstructed.
Clean the pump
filter. If the
problem
persists, consult
your nearest
authorized
service
provider.(*)
E04
Lights 2 and
3 blink.
There is an
excessive
amount of
water in your
machine.
Your machine
will automatically
drain the water.
After your
machine has
completed the
draining
process, shut
down your
machine and
unplug. Close
the tap and
consult your
nearest
authorized
service provider.
(*) See the section regarding maintenance and cleaning of your machine.
35