Elenberg RF-0505 - Инструкция (Страница 8)

8
1. The ground should be level, impacted and dry.
2. Avoid placing upside down or horizontal. The angle should be not less
than 45 between the cabinet and the ground when the inclination is nec-
essary.
3. Remain spaces of 30cm above the refrigerator, 5cm both sides and back
to the refrigerator, or it’ 11 make the air circulation improperly, reduce
freezing effect increase energy consumption.
4. Place your refrigerator in where there is less humidity, that can have
electronic insulation and avoid rust.
5. Avoid placing the refrigerator neat heat sources(stove, warmer etc.) or
direct sunshine.
1. To use sole triangle hole socket. Do not share multi-socket together with
the other electric appliances.
2. Do not spatter water inside or outside the refrigerator parts because
they are easy to be out of order or cause electrical shock when touching
water.
3. Avoid taking the power plug with wet hands.
4. Do not put things which temperature is strictly demanded into the
refrigerator.(such as werum vaccine, learning data etc.)
5. Do not put inflammable things into the refrigerator. Benzene, ether, liq-
uid gas, alcohol, bond etc. Are dangerous to explode.
1. When plug the refrigerator in for the first time, let the empty refrigerator
start work until it stops, usually it will take 2 - 3 hours(10 hours when
summer), then adjust the thermostat knob well.
2. Put the accessories on the pointed position according to the feature
drawing.
3. Turn the controller knob to “3 - 4” gear, put the power plug into the
socket.
4. Ice-making pour the cool boiled water into the ice-making box where is
the water lever line. Put the ice-making box into the evaporator. Turn the
controller knob to “1” upside the ice-making box. Ice is made after 2 - 3
hours. Slightly turn round the ice-making box when taking out the ice.
5. Defrost artificial defrosting is needed when the frost layer of the evapo-
rator is about 3 - 4mm, first, cut the power off, open the door, take out
the ice-making box and food. The refrigerator begins to defrost. Wipe
and dry the evaporator after the defrosting has finished. Then return the
food to the original place.
SAFETY CAUTION
HOW TO USE THE REFRIGERATOR
INSTALLATION METHOD