Vitek VT-6406 - Инструкция (Страница 6)

ENGLISH
6
unit will switch to the weather conditions displaying mode and will start signal search from
the remote sensor, the
symbol will be flashing in the upper right angle.
Note: All setups from the base unit can be performed from the remote sensor. Press SET-
UP to enter Settings.
Weather conditions display adjustment
To receive more precise weather forecast you should enter your current weather condi-
tions at the initial start-up of the unit.
Enter the main menu, by pressing the 9 Exit button of the base unit or the 7 MENU button
on the remote control. Use the ►/◄ buttons to select the Settings mode. Use the ▲/▼
buttons to select Weather forecast. Use the ►/◄ buttons to select one of the following
items Sunny, Partly cloudy, Cloudy, Rain or Lightning storm as initial weather condi-
tions. Press Enter to confirm the parameters, press Exit to cancel the Settings mode.
Weather forecast is built according to the dynamic of atmosphere pressure measuring.
According to the collected data, the weather station can forecast weather for the next 12-
24 hours
At radius of 30-50 km.
Precision is about 70%.
Sunny Partly cloudy Cloudy Rain Lightning storm
Base unit operation modes
The base unit has five operation modes
Photo album Weather Photo and weather Calendar and clock Settings
Use the ►/◄ buttons to select the desired mode, press Enter to enter the desired mode.
“Photo album” mode
Store photos in the JPEG format on a USB device or a card (SD or MMC). When the base
unit is switched off, insert a device in the corresponding jack.
Enter the “Photo album” mode.
Use the ►/◄ buttons to display the next/previous photo
Press SLIDESHOW on the remote control, to switch on the photo viewing mode.
To change zoom of the photo use the ZOOM button, to rotate a photo – use the ROTATE
button.
6406_IM.indd 6 6406_IM.indd 6 12.03.2010 10:19:41 12.03.2010 10:19:41