English, Русский – Инструкция по эксплуатации Vitek VT-1818 B

Страница 3

Advertising
background image

OPERATION METHODS:
1. Connect the hose accessories:
Press the adaptors at both side of the hose end, and then insert the hose into the
hose socket.
2.Connect the telescopic tube to the curved end of the hose.
3.Connect different nozzle tools to the tube for different cleaning pur
poses:
floor brush for hard floor or carpet; integrated brush and nozzle or
crevice nozzle or dust brush or upholstery tool for wall surface, corner, sofa, cur
tain or space between furniture, etc.
4. Turn on the machine:
Hold the plug and pull out the cord, then insert the plug into the power socket,
which conforms to that on the rating label for the power supply. Press the on/off
switch pedal. Adjust the power to your required level for different cleaning func
tion after the power is turned on.
5. Turn off the machine:
After using, press the on/off switch pedal again, the machine is turned off. Pull
the plug out of the power socket, press the cord rewinding pedal, the power cord
will be drawn in.
6.To move your machine from room to room, unplug and carry it by using the
carry handle. Never pull the machine by its cord when moving.

MAINTENANCE:
1. When the dust full indicator turns to be red, it is time to clear the dust or
replace with a new bag. To do that, please follow the instruction:
(a) open the front cover by pressing the lock clip;
(b) take out the bag bolder then remove the dust bag:
(c) for cloth bag you can pull out the clip bar in the bottom of the dust bag and
clear the dust away, then you can relocate the cloth bag for next time using;
(d) for paper bag, you can tip the rubbish out of the bag or throw the mil bag
away, then take a new one, insert it into the bag holder and put it in the slot of the
cabinet;

ENGLISH

3

2. Удалите пылесборник из
удерживающей его пластины.

3. Если Вы используете бумажный
мешок замените его на новый.
При использовании тканевого мешка:
выдвиньте пластмассовый зажим,

удалите пыль из мешка,
установите зажим на место.

4. Вставьте мешок в удерживающие пластины в отсек для пылесборника.
Закройте отсек для пылесборника до защелкивания зажима.
Если мешок установлен неправильно, отсек для пылесборника не
закроется.

ЧИСТКА ФИЛЬТРА

РУССКИЙ

10

Передний фильтр:

1. Откройте передний отсек пылесоса,
извлеките передний фильтр.
2. Осторожно промойте его водой,
высушите в тени.
3. Установите в первоначальное
положение. Закройте отсек.

Верхний фильтр:

1. Откройте верхний отсек пылесоса,
извлеките фильтр.
2. Осторожно промойте его водой,
высушите в тени.
3. Установите в первоначальное
положение. Закройте отсек.

Vt-1818.qxd 20.08.03 12:32 Page 6

Advertising