English – Инструкция по эксплуатации Vitek VT-1802 R

Страница 9

Advertising
background image

Always switch the appliance off immediately after use.
At all times keep nozzles and tube ands well away from eyes and ears.
To clean the appliance, simply wipe it with a damp or dry cloth.
DO NOT:
- unplug the appliance from the mains supply by pulling on the supply cord.
- allow the supply cord to become trapped or pull it over sharp edges.
- use to vacuum: smouldering or hot substances: large pieces of glass; solvents,
or corrosive liquids; acidic liquids; flammable or explosive substances/
- store the appliance out of doors.
- allow the electrical parts of the appliance e.g. supply cord, socket motor, suc-
tion hose, switch etc., to come into contact with water.
Check the suction hose regularly for damage. A damaged suction hose should
not be used.

ASSEMBLING THE APPLIANCE
Rotating suction hose connector with unlocking buttons.
Fig.1
Remove all the parts from the packaging and place them ready.
Insert the rotating connector of the suction hose into the suction inlet until it
clicks into place.
The hose may be completely removed from the body of the cleaner by pressing
the buttons on either side and pulling the connector up and out of the suction
inlet.
2 extension tubes.

Fig.2-A.

Join the two extension tubes together, connect them to the handle of the suction
hose and then attach the required nozzle the end of the tube.

GENERAL NOTES
All the suction nozzles can be connected either to the extension tubes as detail
above or directly to the suction hose. Both the tubes and the hose can be used
without a nozzle.
Easy-glide nozzle.

Fig.2-B.

The easy-glide nozzle makes it possible to vacuum carpets and uncarpeted
floors without having to change the nozzle. By simply switching the relevant lever
a brush can be extended or withdrawn to suit the floor being vacuumed. Carpets
are cleaned with the brush withdrawn and hard floors with the brush extended.
Accessories compartments.
All the other accessories such as the upholstery nozzle and the crevice tool are
conveniently stored in the accessories compartment of the appliance.
Upholstery nozzle.

Fig.2-C

ENGLISH

9

i 1802.qxd 25.05.04 13:02 Page 9

Advertising