Vitek VT-1733 - Инструкция (Страница 3)

IMPORTANT
• Do not leave this heater in function unattended for a long time.
• Before connecting the appliance check that the voltage indicated on the type
plate corresponds to the main voltage in your home.
• Read these instructions carefully, in conjunction with the illustration (page 2)
before using the appliance.
• The appliance is double insulated and need not be connected to an earthed
mains outlet. If you wish to use an extension cord, a 2 wire type is suitable.
However, ensure that the plugs and cord allow high power (16A 220V /13A
240V AC). If a reel type is employed, please unroll the cord completely to pre
vent overheating.
• It may happen, especially if the heater operates on position oo and another
electrical device is switched on as well, that the fuse or circuit breaker cuts
off the mains power. In such a case, the fuse or circuit breaker may not allow
this electrical power. You may connect one of the involved appliances to
another circuit (employing another fuse or circuit breaker) or have the elec
trical installation revised by an authorized electrician.
• The heater is not designed for use as the main form of heating. Use the appli
ance only for the intended use, i.e. extra heating in the house.
• To avoid the risk of fire and electrical shock select a safe place for the heater.
(See section "Safe Positioning").
• Do not insert any objects into the heater.
• Ensure that children cannot play with the appliance.
• Attention: the front grille gets hot during use!
• Only touch the heater with dry hands!
• If the mains cord of this appliance is damaged, it must only be replaced by a
service representative, as special tools and/or parts are required.
• Do not place this heater just below a wall socket
SAFE POSITIONING
• Only use the fan heater when it is standing. For your own safety and that of
others: water and electricity are dangerous combination! Do not use this
heater in a bathroom or near a swimming pool. Ensure that the appliance
cannot fall into water (bath, wash basin, shower cubicle, etc.)
• Do not use the heater in rooms with explosive gas (e.g. petrol) or while using
inflammable glue or solvent (e.g. when glueing or varnishing parquet floors,
PVC, etc.)
ENGLISH
3 10
1733.qxd 22.04.03 17:01 Page 6