Whirlpool AWG 328 - Инструкция (Страница 35)

AUTOAAATIC FAILURE DETECTION SYSTEM
Your machine is equipped with systems which will both take the necessary
precautions and warn you in case of any failure by continually monitoring the
washing processes.
Failure code
Failure
indicator
Probable
failure
Corrective measures
FOR ALL FAILURES
More
than one
light
blink
Any kind
of failure
First Intervention for any kind
of failure
Turn the program knob to the 0
(off) position.
1. Be sure that the selected
program is used properly, please
check on the program chart the
kind of laundry it is suitable for
and the maximum load allowed.
If the laundry and the program
are not consistent, then choose
the correct program and follow
the steps below.
2. If the program and the laundry
type are consistent and problem
available, after waiting for 2
minutes, start the consistent
program for your laundry type.
After this intervention, if the
problem still continues, then
make reset of electronic card
(see programme chart «Cancel a
running programme»), wait for
the reset is finished. Then turn
the program to stop position and
choose the consistent program
for your laundry type and start
it.
E01
Lights 1
and 2
blink.
The door is
not shut
properly.
Shut the door properly so that
you hear it click. If the problem
persists, follow ‘for all failures’
instructions.
In the case that problem still
continues. Turn off the machine,
unplug it and consult your
nearest authorized service
provider._____________________
(*) See the section concerning maintenance and cleaning of your machine.
33