Whirlpool AWG 328 - Инструкция (Страница 25)

• Water pressure of 1-10 bars {0,1-1,0 MPa) from your tap will enable your
machine to work more efficiently (1 bar pressure means water flow of more than
8 litres per minute from a fully opened tap).
• After connections are secure, check for non-leakage of the connection joints
by turning on your tap fully.
• Be sure that water inlet hoses are not folded, broken or crushed.
• Mount the water inlet hoses to a 3*74, geared water tap.
Water drain connection
• Be sure that water inlet hoses are not folded, twisted, crushed or elongated
by stretching.
« Water drain hose should be mounted at a height of minimum 60 cm, maximum
100 cm from the ground.
• The end of the water drain hose may be directly fitted to the dirty water
outlet hole or a special apparatus mounted on the outlet bracket of the wash-
stand.
• Never attempt to extend the water drain hose by adding extra parts.
• We recommend that you use only new
water hoses supplied with the appliance.
You must not use the water hoses that
have already been in use.
23