Troubleshooting, Error display, E-16 – Инструкция по эксплуатации Sharp KCF31RW

Страница 38

Advertising
background image

E-16

TROUBLESHOOTING

ERROR DISPLAY

If the error continues to occur, contact a Sharp Service Center.

DIGITAL

INDICATION

ERROR DETAILS

REMEDY

Fan motor error.

Temperature-humidity sensor error.

Unplug the unit, wait one minute, then plug he unit in

again.

TROUBLESHOOTING

SYMPTOM

REMEDY (the following are not due to a malfunction)

Odor and smoke persists.

• The air may have been dirty when the unit was plugged in.

Unplug the unit, wait one minute, and then plug the unit in again.

The Filter Indicator Light is on.

• Check the filters. If they appear to be extremely dirty, clean or

replace them. (Ref. E-11,E-12,E-13,E-14,E-15)

• Dirty or clogged dust sensor openings interfere with sensor

operation. Gently clean the back panel.

(Ref. E-11).

• The unit may make clicking or ticking sounds when it is

generating ions.

• Check to see if the filters are extremely dirty.

• Clean or replace the filters.

• Plasmacluster Air Purifiers emit small traces of ozone that can

produce an odor.
• Check to see if the unit is installed in a location that makes it

difficult for the sensors to detect cigarette smoke.

• Check to see if the dust sensor openings are blocked or clogged.

If they are blocked or clogged, clean the back panel.

(Ref. E-11)

• Whenever replacing the filters, connect the power cord to an

outlet and then press the Filter Reset Button.

 

• Check to see if the Lights OFF Mode is selected. If it is selected,

press the Light ON/OFF Button to turn the indicator lights on.

(Ref. E-9)

・Check to see if the SLEEP mode is selected. (Ref. E-8)
• Clean the Humidifying Tray. Make sure that the unit is on a level

surface.

• Check to see if the Humidifying Tray is correctly installed. Check

the Humidifying Filter.

• If the Humidifying Filter is extremely dirty, clean or replace it.

(Ref. E-12, E-13, E-15).

• Humidification amount gets lower when humidity reaches to the

proper amount (55 ~ 65%) by the actuation of humidity sensor in

the case of fan speed automatic.

• There is a difference in the humidity level within the same room.

• The sensor have different measurement parameters.

• If the monitor indicates TEMPERATURE, press the Display Select

Button. (Ref. E-9)

• The Dust Sign lights automatically change color when the dust

sensor detect impurities.

The Dust Sign light is green even

when the air is not clean.

The Dust Sign light is orange or red

even when the air is clean.

The unit makes a clicking or ticking

sound.
Air discharged from the unit has an

odor.

The unit does not operate when

cigarette smoke is in the air.

The Dust Sign lights are turned off.

The Humidify Light does not light off

when the Humidifying Tray is empty.

The water level in the Humidifying

Tray does not decrease or decreases

slowly.

The Dust Sign lights change color

frequently.

There is a discrepancy between the

unit’s Humidity Monitor and another

hygrometer in the room.

Before calling for service, review the troubleshooting chart below to make sure

that the problem is not a unit malfunction.

Advertising