Sharp SJXE35PMSL - Инструкция (Страница 16)

16
• Temperature indicator changes as the pictures below
( 3→4→5→1→2→3) in each case (Refrigerator compartment
/ Freezer compartment) by pressing “R” or “F” button.
1
2
3
4
5
NOTE
• At first, both compartments are set at “Factory setting”.
• After adjusting the temperature level, the indicator will turn
off approximately 5 seconds later.
• When the operation of refrigerator stops because of power
failure, temperature setting is restarted from the previous
setting at the time of re-power.
Advanced Setting of Refrigerator /
Freezer compartment
The temperature of refrigerator compartment and freezer compartment
can be adjusted in 9 levels (level 1 ~ 9) by following steps.
Refrigerator compartment
1.
Press “R” button first. Hold down “R” button and then press
“Express freezing” button for 3 seconds or more.
The indicator will return to “Factory setting”.
2.
Press “R” button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
Freezer compartment
1.
Press “F” button first. Hold down “F” button and then press
“Express freezing” button for 3 seconds or more.
The indicator will return to “Factory setting”.
2.
Press “F” button to change the temperature level.
Follow step 1 again if you want to adjust the temperature in 5 levels.
Controlling Temperature
The refrigerator controls its temperature automatically. However, you can adjust the temperature in 5 levels.
How to check the current temperature
level
The indicator will be “ON ” to show the current temperature
level by pressing “R” or “F” button.
Refrigerator compartment : Press “R” button.
Freezer compartment : Press “F” button.
Setting of Refrigerator / Freezer
compartment
Refrigerator compartment
1.
Press “R” button.
2.
Press “R” button to change the temperature level.
Freezer compartment
1.
Press “F” button.
2.
Press “F” button to change the temperature level.
Beep beep beep
Beep
Beep
Level Indicator
<Factory setting>
Beep beep beep
• Temperature indicator changes as the pictures
below ( 5→6→7→8→9→1→2→3→4→5) in
each case (Refrigerator compartment / Freezer
compartment) by pressing “R” or “F” button.
1
2
3
4
5
6
7
8
9
... ... ...
<Factory setting>
OFF Lighting Flashing
Level Indicator
(B803).indb 16 2017/02/17 14:53:32