Инструкция по эксплуатации Whirlpool AWG 328
Страница 37
Внимание! Текст в этом документе был распознан автоматически. Для просмотра оригинальной страницы Вы можете воспользоваться режимом "Оригинал".
Failure code
Failure
indicator
Probable
failure
Corrective measures
E06
Lights 3
and 4
blink.
The motor
has failed.
Follow ‘for all failures’
instructions.
In the case that problem still
continues, shut down and unplug
your machine, turn off the tap
and consult your nearest
authorized service provider._____
E07
Lights 1,
2 and 3
blink.
Electronic
card has
failed.
Follow ‘for all failures’
instructions.
In the case that problem still
continues, shut down and unplug
your machine. Turn off the tap
and consult your nearest
authorized service provider._____
EOS
Lights 2,
3 and 4
blink.
The motor
has failed.
Follow ‘for all failures’
instructions.
In the case that problem still
continues, shut down and unplug
your machine, turn off the tap
and consult your nearest
authorized service provider._____
E09
Lights 1,
2 and 4
blink.
The
network
voltage is
too high or
too low.
If the network voltage is lower
than 150V or higher than 260V,
your machine will automatically
stop. When the network voltage
is recovered, your machine will
continue its operation._________
E10
Lights 1,
3 and 4
blink.
Communica
tion error.
Follow ‘for all failures’
instructions.
In the case that problem still
continues, shut down and unplug
your machine. Turn off the tap
and consult your nearest
authorized service provider._____
35