Sony GV-D1000E - Инструкция (Страница 111)

111
Customizing Your VCR
Bыполнeниe индивидyaльныx нacтpоeк видeомaгнитофонa
Notes on the LP mode
•When you record a tape in the LP mode on your VCR, we recommend playing the tape back on the
same VCR. When you play back the tape on other camcorders or VCRs, noise may occur in pictures
or sound.
•When you record in the LP mode, we recommend using a Sony Excellence/Master cassette so that
you can get the most out of your VCR.
•You cannot perform audio dubbing on a tape recorded in the LP mode. Use the SP mode for a tape to
be audio dubbed.
•When you record in the SP and LP modes on one tape or you record some scenes in the LP mode, the
playback picture may be distorted or the time code may not be written properly between scenes.
Notes on AUDIO MODE
•You cannot dub audio sound on a tape recorded in the 16-bit mode.
•When playing back a tape recorded in the 16-bit mode, you cannot adjust the balance in AUDIO MIX.
Notes on DEMO MODE
•You cannot select DEMO MODE when a cassette is inserted in your VCR.
•You cannot select DEMO MODE when a “Memory Stick” is inserted in your VCR.
(Continued on the following page)
Changing the menu settings
Icon/item
REC MODE
AUDIO MODE
q REMAIN
CLOCK SET
LTR SIZE
DEMO MODE
Mode
z SP
LP
z 12BIT
16BIT
z AUTO
ON
——
z NORMAL
2
×
z OFF
ON
Meaning
To record in the SP (Standard Play) mode.
To increase the recording time to 1.5 times the SP mode.
To record in the 12-bit mode (two stereo sounds).
To record in the 16-bit mode (one stereo sound with high quality).
To display the remaining tape bar:
• for about eight seconds after a cassette is inserted and your VCR
calculates the remaining amount of tape while the display shows.
• for about eight seconds after H or DISPLAY is pressed.
To always display the remaining tape indicator.
To set the date and time (p. 19).
To display selected menu items in normal size.
To display selected menu items at twice the normal size.
To cancel the demonstration mode.
To make the demonstration appear.