Troubleshooting – Инструкция по эксплуатации Sony DCR-VX2100E

Страница 217

Advertising
background image

Additional Information /

Дополнитeльнaя инфоpмaция

217

Troubleshooting

Symptom

Some tiny white spots appear on
the LCD screen or in the
viewfinder.

Diagonal stripes appear on the
screen.

Unknown pictures or messages
are displayed on the LCD screen
or in the viewfinder.

The click of the shutter does not
sound.

The image is not bright even if
you use the video flash light.

In the playback mode

Symptom

The tape does not move when a
video control button is pressed.

The playback button does not
function.

There are horizontal lines on the
picture or the playback picture is
not clear or does not appear.

No sound or only a low sound is
heard when playing back a tape.

The title search function does not
work.

(continued on the following page)

Cause and/or Corrective Actions

• When the shutter speed is too low or the low lux mode is selected.

• ZEBRA selector is set to 70 or 100.

c Set ZEBRA selector to OFF. (p. 69)

• If 10 minutes elapse after you set the POWER switch to CAMERA or

DEMO MODE is set to ON in the menu settings without a cassette
inserted, your camcorder automatically starts the demonstration.
c Insert a cassette. The demonstration stops.

You can also cancel DEMO MODE. (p. 162)

• BEEP is set to OFF in the menu settings.

c Set it to MELODY or NORMAL. (p. 156)

• The ND FILTER selector is set to 1 or 2.

c Set it to OFF. (p. 68)

• The manual adjustment is not suitable for the situations. (The

indicator flashes.)
c Set the AUTO LOCK selector to AUTO LOCK, or cancel the manual

adjustment. (p. 63)

Cause and/or Corrective Actions

• The POWER switch is not set to VCR.

c Set it to VCR. (p. 40)

• The tape has run out.

c Rewind the tape. (p. 44)

• The video head may be dirty.

c Clean the heads using the Sony DVM12CL cleaning cassette

(optional). (p. 235)

• The volume is turned to minimum.

c Turn up the volume. (p. 40)

• AUDIO MIX is set to the ST2 side in the menu settings.

c Adjust AUDIO MIX. (p. 156)

• The tape has no cassette memory.

c Use a tape with cassette memory. (p. 97, 210)

• CM SEARCH is set to OFF in the menu settings.

c Set it to ON. (p. 156)

• There is no title in the tape.

c Superimpose the titles. (p. 143)

• The tape has a blank portion in the recorded portion. (p. 98)

Advertising