Specifications, General, Input connectors – Инструкция по эксплуатации Panasonic AW-RP655

Страница 85: Output connectors, Input/output connectors, Other

Advertising
background image

42 (E)

ENGLISH

Power supply:

DC 10.8 V to DC 16 V

Power consumption: 9.0 W

General

Ambient operating temperature
–10°C to +50°C
Storage temperature
–20°C to +60°C
Ambient operating humidity
30% to 90% (no condensation)
Weight
3.5 kg
Dimensions (WHD)
42052220 mm
Finish
AV ivory paint (colour resembling Munsell 7.9Y 6.8/0.8)
Pan/tilt heads supported
AW-PH300, AW-PH300A, AW-PH350, AW-PH360,

AW-PH500, AW-PH600, AW-PH650

Cameras supported
AW-E300, AW-E300A, AW-E600, AW-E800, AW-E800A,

AW-E350, AW-E650, AW-E655, AW-E750, AW-E860

Input connectors

DC 12V IN socket
XLR, 4-pin
GND
Connect this to ground for use.

Output connectors

MONITOR SELECT connector
RJ45

Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 50 meters

Input/Output connectors

TO CONTROL PANEL [IN/OUT] connectors
RJ45 (1 each)

Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 1,000 meters
When more than one additional panel is to be connected,
make sure that the total length of all the cables does not
exceed 1,000 meters.

TALLY/INCOM
D-SUB, 15-pin
REMOTE/SERVICE
RS-232C
TO PAN/TILT HEAD [1/EXT, 2 to 5] connectors
RJ45 5, control signal output for pan/tilt heads

Connecting cable:
10BASE-T straight cables (UTP category 5),
max. 1,000 meters

INCOM
XLR, 4-pin

Other

TERMINATION switch
Termination setting for communication line with control

panel

ID switch
Operations mode (MAIN, 1, 2) setting.
REMOTE/SERVICE switch
Maintenance switch. Set in the “N” position during use.

Weight and dimensions shown are approximate.
Specifications are subject to change without notice.

Specifications

indicates safety information.

Advertising
Эта инструкция подходит к следующим моделям: