Panasonic AW-PH405E - Инструкция (Страница 29)

8 (E)
ENGLISH
Specifications
Genlock input: BNC
Black burst or composite video signal, Tri Sync
Prompter input
(PROMPTER IN): BNC
Through output to PROMPTER connector
Prompter output
(PROMPTER OUT): D-SUB 15-pin
Camera video output
VIDEO: BNC, 75-ohm output
Y: BNC, 75-ohm output
Pr/C: BNC, 75-ohm output
Pb: BNC, 75-ohm output
SDI: BNC
AUX: BNC
Camera, pan-tilt head control: RJ45, RS-4, pan-tilt head control signal output
RP Connecting cable: 10BASE-T straight cable (equivalent to UTP category 5),
max. 1000 meters
Functions/performance: Maximum weight capacity: 15 kg
Tilt range: 00 degrees (approx. ±150 degrees)
The tilt range is subject to restrictions depending on the cable and lens of camera to be
mounted on pan-tilt head.
Pan range: 00 degrees (approx. ±150 degrees)
Maximum operating speed: 45 degrees/sec.
( when the centre of gravity of the units installed on the pan-tilt head has been aligned with
the head’s centre of rotation)
(Maximum operating speed with prompter mounted: 15 degrees/sec.)
Stop accuracy: ±´
Noise level: Less than NC5 (at less than 0 degrees/sec.)
Ambient operating temperature: –5°C to +45°C
Storage temperature: –0°C to +65°C
Ambient operating humidity: 0% to 90% (no condensation)
Dimensions (WHD): 19416168 mm
Weight: Approx. 10 kg
Finish: AV ivory paint (colour resembling Munsell 7.9Y6.8/0.8)
Weight and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
Supply voltage: AC 0 to 40 V, 50 Hz
Power consumption: 10 W
indicates safety information.