Yamaha Disklavier Mark III Series - Инструкция (Страница 6)

PLEASE KEEP THIS MANUAL
92-469-DK b
IMPORTANT SAFETY INSTRUCTIONS
INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK,
AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
WARNING— When using any electrical or electronic
product, basic precautions should always be followed. These
precautions include, but are not limited to, the following:
1. Read all Safety Instructions, Installation Instructions,
Special Message Section items, and any Assembly
Instructions found in this manual BEFORE making
any connections, including connection to the main
supply.
2. Main Power Supply Verifi cation: Yamaha products
are manufactured specifi cally for the supply voltage
in the area where they are to be sold. If you should
move, or if any doubt exists about the supply voltage in
your area, please contact your dealer for supply voltage
verifi cation and (if applicable) instructions. The required
supply voltage is printed on the name plate. For name plate
location, please refer to the graphic found in the Special
Message Section of this manual.
3. This product may be equipped with a polarized plug
(one blade wider than the other). If you are unable
to insert the plug into the outlet, turn the plug over
and try again. If the problem persists, contact an electrician
to have the obsolete outlet replaced. DO NOT defeat the
safety purpose of the plug.
4. DANGER— Grounding Instructions: Disklavier
Grand must be grounded and therefore has been
equipped with a three pin attachment plug. If this
product should malfunction, the ground pin provides a
path of low resistance for electrical current, reducing the
risk of electrical shock. If your wall socket will not
accommodate this type plug, contact an electrician to have
the outlet replaced in accordance with local electrical
codes. Do NOT modify the plug or change the plug to a
different type!
5. WARNING: Do not place this product or any other
objects on the power cord or place it in a position
where anyone could walk on, trip over, or roll
anything over power or connecting cords of any kind. The
use of an extension cord is not recommended! If you must
use an extension cord, the minimum wire size for a 25' cord
(or less) is 18 AWG. NOTE: The smaller the AWG number,
the larger the current handling capacity. For longer
extension cords, consult a local electrician.
6. Ventilation: Electronic products, unless specifi cally
designed for enclosed installations, should be
placed in locations that do not interfere with proper
ventilation. If instructions for enclosed installations are
not provided, it must be assumed that unobstructed
ventilation is required.
7. Temperature considerations: Electronic products
should be installed in locations that do not
significantly contribute to their operating
temperature. Placement of this product close to heat
sources such as; radiators, heat registers and other devices
that produce heat should be avoided.
8. This product was NOT designed for use in wet/damp
locations and should not be used near water or
exposed to rain. Examples of wet/damp locations
are; near a swimming pool, spa, tub, sink, or wet
basement.
9. This product should be used only with the
components supplied or; a cart, rack, or stand that
is recommended by the manufacturer. If a cart, rack,
or stand is used, please observe all safety markings and
instructions that accompany the accessory product.
10. The power supply cord (plug) should be disconnected
from the outlet when electronic products are to be
left unused for extended periods of time. Cords
should also be disconnected when there is a high
probability of lightning and/or electrical storm activity.
11. Care should taken that objects do not fall and liquids
are not spilled into the enclosure through any
openings that may exist.
12. Electrical/electronic products should be serviced
by a qualifi ed service person when:
a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids have
been spilled into the enclosure through openings; or
c. The product has been exposed to rain; or
d. The product does not operate, exhibits a marked
change in performance; or
e. The product has been dropped, or the enclosure of
the product has been damaged.
13. Do not attempt to service this product beyond that
described in the user-maintainance instructions. All
other servicing should be referred to qualifi ed service
personnel.
14. This product, either alone or in combination with
an amplifi er and headphones or speaker/s, may be
capable of producing sound levels that could cause
permanent hearing loss. DO NOT operate for a long period
of time at a high volume level or at a level that is
uncomfortable. If you experience any hearing loss or
ringing in the ears, you should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time
period before damage occurs.
15. Some Yamaha products may have benches and/or
accessory mounting fi xtures that are either supplied
as a part or the product or as optional accessories. Some
of these items are designed to be dealer assembled or
installed. Please make sure that benches are stable and any
optional fi xtures (where applicable) are well secured
BEFORE using. Benches supplied by Yamaha are designed
for seating only. No other uses are recommended.
Mark III_Ru_A.indb 6 Mark III_Ru_A.indb 6 6/24/2008 10:30:00 AM 6/24/2008 10:30:00 AM