General setting, P. 30, Hdmi control” (p. 30) – Инструкция по эксплуатации Yamaha BD-S671

Страница 76: Usb (p. 30), P. 30), P. 30). the default, Local storage” (p. 30)

Advertising
background image

SETUP MENU

30

En

General Setting

The default settings are marked with “

*

”.

System

Screen Saver

You can set the screen saver to on/off.
When set to on, this Player will switch to screen saver
mode if there is no operation for 5 minutes. After that, this
Player will turn to standby mode when there is no
operation for 20 minutes.

On

*

, Off

Disc Auto Playback

You can set Disc Auto Playback to on/off. When set to on,
a disc will play back automatically after loading.

On

*

, Off

HDMI Control

You can set the Player to receive control signal from a
TV/AV receiver compatible with the HDMI Control
function via an HDMI cable (p. 12).

On, Off

*

Network Control

You can set control via Ethernet to on/off. This player
employs Yamaha Network Control protocol (YNC).

On, Off

*

– When set to on, power consumption during standby

mode increases due to network control function.

– When set to on, the system startup time is decreased.

Load Default

You can reset all settings of this Player to default setting
except Security setting (p. 31). For details on default
settings, see pages 27-34.

Upgrade

You can upgrade the software manually from Disc, USB
Storage or Network. For details on software upgrade, refer
to “SOFTWARE UPGRADE” (p. 37).

Easy Setup

You can perform Easy Setup (p. 18).

Local Storage

You can display Local Storage information, format Local
Storage, and select Front USB/Rear USB to save the BD-
Live data.
To format (empty) the “BUDA” folder in the USB
memory device, select Information and press ENTER
when “Format” is focused on the screen.

Front USB, Rear USB

*

– Local Storage is used as an auxiliary memory when

Blu-ray Disc is played back.

3D Playback Message

You can turn on or off a warning message concerning 3D
video playback that appears on the TV when this Player is
turned on.

On

*

, Off

Using HDMI Control function

Using the HDMI Control function, you can interactively
operate this Player with your TV (HDMI Control
function supported).
When you connect this Player to the TV compatible with
the HDMI Control function using an HDMI cable and
set HDMI Control in the SETUP menu to on (p. 30), you
can perform the function listed below.

• Automatic input select function

When you start playback of this Player, the input
selector of the TV (and an AV receiver if this Player is
connected to the TV via the AV receiver) is switched
to this Player automatically. TV Power is turned on
automatically depending on the TV.

• Automatic power off function

When you turn off the TV while this Player is in stop
mode and the SETUP menu screen is not displayed,
the power of this Player is also turned off
automatically.

– HDMI Control function may not work properly

depending on the TV.

– Functions other than ones shown above may work

depending on the TV or AV receiver.

– In order to make the HDMI Control function

available, set up settings for the HDMI Control
function on ALL components (this Player, TV,
and AV receiver). Certain operation may also be
required.

– Each function may be set independently to

activate/deactivate depending on the TV.

– Refer to the operation manuals supplied with the

TV and/or AV receiver for details regarding setup.

– When set to on, power consumption during

standby mode increases due to HDMI control
function.

Notes

Notes

Hint

Advertising