Playback, Basic operations, P. 33 – Инструкция по эксплуатации Yamaha RX-V463

Страница 35: Movie dramatic, Input: dvd

Advertising
background image

PLAYBACK

33

En

English

BA

S

IC

OPERA

T

ION

1

Turn on the video monitor connected to this
unit.

2

Press J

SPEAKERS repeatedly to select the

front speakers you want to use.
The respective speaker indicators lights up in the
front panel display.

3

Press O

INPUT l / h repeatedly (or press

one of the input selector buttons (3)) to
select the desired input source.
The name of the currently selected input source
appears in the front panel display for a few seconds.

4

Start playback on the selected component or
select a broadcast station.
• Refer to the operating instructions for the source

component.

See page 43 for details about FM/AM tuning

instructions.

5

Rotate I

VOLUME (or press

L

VOLUME +/–) to adjust the volume to the

desired output level.

6

Press L

PROGRAM l / h repeatedly (or

press 4

AMP and then APROG l / h

repeatedly) to select the desired sound field
program.
The name of the selected sound field program appears
in the front panel display.
See page 38 for details about sound field programs.

• Choose a sound field program based on your listening

preference, not merely on the name of the program.

• When you select an input source, this unit automatically selects

the last sound field program used with the corresponding input
source.

• Sound field programs cannot be selected when the component

connected to the MULTI CH INPUT jacks is selected as the
input source (see page 34).

• When PCM signals with a sampling frequency higher than 48

kHz are input, this unit is automatically set to the “STRAIGHT”
mode (see page 39).

• To display information about the currently selected input source

in the OSD, see page 36 for details.

A quick guide to contents

Playback

Caution
Extreme caution should be exercised when you play
back CDs encoded in DTS. If you play back a CD
encoded in DTS on a DTS-incompatible CD player,
you will only hear some unwanted noise that may
damage your speakers. Check whether your CD player
supports CDs encoded in DTS. Also, check the sound
output level of your CD player before you play back a
CD encoded in DTS.

Basic operations

USB

MULTI CH

DVR

V-AUX

DTV/CBL

DVD

CD

MD/CD-R

TUNER

INPUT: DVD

Currently selected input
source

Available input sources

Notes

When you want to...

See

page

Enjoy high quality sound

41

Adjust the tonal quality of the front speakers

41

Adjust the parameters of sound field programs

40

Enjoy the sources with a wide dynamic range at night

42

Use headphones

35

Select a decoder to play back sources with

39

Automatically set this unit to the standby mode

37

Movie Dramatic

Currently selected

surround field program

Advertising